SMART I/O User’s Manual
March 12, 1996
©1996 PEP Modular Computers GmbH
Page 4 - 38
Chapter 4 Digital Modules
4.3.8 ‘C’ Programming
4.3.8.1 SM-REL1 Library
The SM-REL1 library of functions
smartio.l
provide a convenient way of
accessing the SM-REL1 module.
• All functions are written in ANSI C;
• Prototypes are to be found in the file
rel1lib.h
.
Hardware Requirements
• SMART I/O Base Module or Base Module and Extension unit;
• SM-REL1 Module.
Software Requirements
The compiler from one of the following:
• Ultra C Version 1.1.2 or higher;
• FasTrak 2.0.2 or higher.
The leftmost SM-Module has number 0 assigned to it a far as programming
is concerned although physically this is slot 1!
Before a library function can be used, the function
SMREL1Init
must first be
called. This allocates the requested resources. Furthermore, this function
needs to be called for each SM-REL1 Module called within the task. Upon
completion of the application, the function
SMREL1DeInit
needs to be called
for each SM-REL1 Module that has been initialized.
In order to illustrate the use of the SM-REL1 library, an application example
called
demrel1.c
can be found in the SMART I/O application directory
(normally found in
/<device>/APPLIC/SMART/CMDS
).
