SMART I/O User’s Manual
March 12, 1996
©1996 PEP Modular Computers GmbH
Page 1 - 26
Introduction
1.5.4 Demo Application
Several demonstration applications are delivered with the ISaGRAF set of
disks and are installed automatically. The applications suitable for use with
the SMART I/O are prefixed
SM-
and serve to show how the SMART I/O
can be used through practical examples. Two such programs, the
SM-
DEMO1
and
2
are discussed here :
SM_DEMO1
should be used if the SMART I/O has the SM_DOUT1
module in the first of the SMART Module slots and has SM_DIN1 in slot 2
(the last) on the SMART-BASE.
SM_DEMO2
should be used if the modules are reversed.
To install the demonstrations correctly, observe the following procedure and
make sure the correct diskette is in place :
•Run the
Projects
Program and select SM_DEMO1 or SM_DEMO2 by
double clicking on the icon;
•Go to the
Debug/PC-PLC Link
Menu to ensure that the correct COM
port is selected for communication to the SMART I/O;
•When confirmed, select
Debug/Debug;
•From the Debugger Window, select
File
from the pull-down
menu if an application is already executing (indicated by
Run
in the
status line);