20
21
07. Troubleshooting
DANGER!
Never attempt to repair the appliance yourself. Always remove the power
plug from the socket whenever a fault occurs.
Problem
Possible cause
Remedy
The appliance is
connected, but
does not show
any function.
•
The water tank has not been
attached properly to the base.
•
Place the water tank properly on
the base.
•
No power supply.
•
If necessary, have the grounded
socket the appliance is connected
to and/or the installation checked
by a qualified electrician.
•
The cable is defective.
•
Consult a qualified electrician.
The object to be
cleaned does
not get clean.
•
Appliance is not switched on.
•
Switch the appliance on.
•
There is no water or too little
water in the tank.
•
Fill water in until the
„MAX”
marking is reached.
•
No cleaning detergent added.
•
Add cleaning detergent depending
on the type of soiling.
08. Technical Data
Article no.
16611021
Mains voltage
220–240 V ~ 50 Hz
Class of protection
∏
II
Max. filling capacity
350 ml
Tank capacity
450 ml
Ultrasonic output
35 W
Ultrasonic frequency
42 kHz
In the course of product improvements we reserve the right to make technical and visual
changes on the appliance or to its accessories.
NOTES:
•
The regular addition of commercial denture cleansers (tablets or powder) can inhibit bacte-
ria growth on the denture.
•
Increasing the cleaning effect is also possible by simply adding commercial dishwashing
detergent. It solves those grease traces from the surface of the object to be cleaned that
cannot be removed by the ultrasonic impulses.
Ensure that the dishwashing detergent does not contain any lipid-replenishing substances.
•
In order to remove dirt that was not eliminated during the first cleaning process, we recom-
mend repeating the cleaning process. Please allow the appliance to cool sufficiently before
you start a new cleaning process.
•
After the cleaning process is finished, pull out the power plug from the grounded socket,
open the lid and remove the object from the appliance.
Empty the tank in order to prevent limestone. The water tank can be removed for emptying
and cleaning purposes (
→
06. Cleaning and Care).
06. Cleaning and Care
DANGER!
Before cleaning the appliance, pull out the power plug and allow the appliance to cool.
Never immerse the device, cable or power plug in water or another liquid for cleaning
and care purposes.
WARNING!
Do not clean the ultrasound cleaner with aggressive cleaners or pointed objects.
•
The water tank can be removed for easy emptying/filling and for cleaning.
•
Use a cloth to clean and dry the tank.
•
Ensure that there is
no residual water
left in the container in order to prevent limescale.
•
Store the appliance in a cool and dry place.
•
Keep the ultrasound cleaner out of children’s reach.