31
GB
How to use the spiralizer
The spiralizer helps you prepare raw vegetable spirals as well as vegetable spaghetti for
salads and vegetable noodle recipes.
WARNING!
The blades are very sharp. Handle with care.
The motor block
3
must be disconnected from the mains before connecting it to the spiralizer
driver unit
21
.
1. Place the collection cup
25
on a dry, level and solid surface.
2. Place insert holder
23
or
24
on the collection cup
25
. Make sure it is properly seated.
3. Place the spiralizer housing
22
on the collection cup and fix it by turning it clockwise so
that it locks in place with an audible click.
4. Fix the motor block
3
to the spiralizer driver unit
21
by screwing it on clockwise as far as
it will go.
5. Plug the mains plug into a suitable wall socket.
6. Fix the vegetables to be processed to the spikes of the spiralizer driver unit
21
. Long veg-
etables (e.g. cucumbers) have to be cut to the length of the spiralizer housing and inserted
centrally.
7. Switch on the appliance and, slowly and without applying pressure, insert the spiralizer
driver unit
21
into the spiralizer housing
22
until the vegetables are completely cut. This
is only possible when the protruding bar on the spiralizer driver unit
21
is inserted into
the slot on the spiralizer housing
22
.
HINWEISE:
●
●
Use insert holder
23
to prepare vegetable spaghetti.
●
●
Use insert holder
24
to prepare vegetable spirals..
