DE
GB
ES
IT
FR
CZ
SK
HR
PL
RO
BG
23
5. PREPaRatIOn
nOtE:
The toaster may give off a smell when first used. Therefore we
recommend operating the device two or three times without bread on a
medium toasting level leaving the window wide open.
1. Remove the packing material.
2. Unwind the desired length of cable from the cable spool.
3. Pass the power cable out on the side and secure with the cable clamp.
4. Plug the mains plug into an earthed wall socket.
6. tOaStInG
CautIOn:
Do not lay bread, or anything else, on top of the toasting com-
partments.
nOtE:
The lowering lever, with which the device is switched on, will only
engage if the device is plugged in.
Toasting bread
1. Put the bread in the toasting compartment. Do not use slices that are
too thick. The bread must not be trapped in the toasting compartment.
2. Use the knob to set the desired toasting level. The toasting level can be
set between …
…
1
= very light toasting / slight browning and
…
7
= very heavy toasting / very strong browning
The result depends, among other factors, on the type and freshness of
the bread.
nOtE:
Toasting level
7
causes very strong browning. With thick slices, this
can create smoke. If this occurs, cancel the toasting process by pressing
the stop button .
3. Press the lowering lever down until it locks into position. The bread is
lowered and the device switches on. The light around the stop button
lights up.
4. At the end of the toasting time the light around the stop button
goes
out and the bread is lifted. Remove the bread.
Cancelling the toasting process
Press the Stop button
,
to interrupt the toasting process. The light around
the stop button
goes out and the bread is lifted.
Toaster 2015.indb 23
06.11.17 12:54
