8
Fig. 3
4. Repairs
Repairs are to be conducted by ECOM Instruments GmbH
or service centres authorised by ECOM Instruments GmbH,
because the safety of the unit needs to be tested after
repairs are implemented.
5. Cleaning, maintenance and storage
• Only use a suitable cloth or sponge to clean the unit.
• Do not use any solvents or abrasive cleaning agents
when cleaning.
• We recommended having the operation and lumen
output of the device checked by the manufacturer every
two years.
• The batteries should be taken out of the unit if it is to be
stored for extended periods.
• The storage temperature should be within the permitted
range of -30 °C to +60 °C.
• It should be observed that the electrical performance
of specific types of Zinc-Manganese Dioxide (Zn/MnO
2
)
batteries are limited to ambient temperatures below
the product specified ambient temperature range. The
datasheets for the specific manufacturer and type
of battery used should be consulted to see what the
recommended ambient temperature range of use is to
achieve maximum battery performance”
