20
16-11
30
H-System – Isolated Barriers and Termination Boards for HIMA
Dismounting, Maintenance, and Repair
5
Dismounting, Maintenance, and Repair
Disconnecting Circuits
1. Disconnect the power supply.
2. Disconnect the field circuit.
3. Disconnect the control circuit.
5.1
Isolated Barriers Dismounting
Dismounting the Isolated Barrier from the Termination Board
1. Pull the Quick Lok bar (1) into the upper position.
2. Carefully pull out the device from the contacts and locking elements.
Figure 5.1
Dismounting of an H-System isolated barrier
Danger!
Danger to life from using damaged or repaired devices.
Using a defective or repaired device can compromise its function and its electrical
safety.
• Do not use a damaged or polluted device.
• The device must not be repaired, changed or manipulated.
• If there is a defect, always replace the device with an original device from
Fuchs.
1
Quick Lok Bar
2
Coding pins
3
Adjustment pins
1
2
3
System Description H-System
–
Isolated Barriers and Termination Boards for HIMA
