2597
78 2013-
02
20
Installation
The Handheld is now fitted to the handle.
5. Push down the Handheld carefully until the locking device on the Handheld
engages in the handle.
6. Connect the interface cable to the cable connection socket underneath the
handle.
The Handheld is now ready for operation.
Fitting a handle with integrated storage battery
A handle with integrated battery is also available for this Handheld as an optional
accessory. Fit the handle to the Handheld as follows:
1. Remove the battery from the battery compartment of the Handheld if neces-
sary.
2. Slide the plastic tab on the battery into the corresponding recess on the
Handheld.
3. Push down the Handheld carefully until the locking device on the Handheld
engages in the handle.
The Handheld is now fitted to the handle.
Securing the interface cable to prevent inadvertent removal
You have the option of attaching a cord grip to prevent the interface cable from
being pulled out inadvertently. Proceed as follows:
1. Secure the interface cable to the cable connection socket on the handle.
2. Guide the cable through the slot on the cord grip and slide the cord grip
towards the cable connection socket.
3. Make sure that you slide the cord grip over the interface cable and into the
correct position.
4. Screw the cord grip to the handle using the screws provided.
