2597
78 2013-
02
26
Commissioning
Connecting the interface cable to the Handheld
To connect the interface cable to the Handheld, proceed as follows:
1. Turn the 8-pin DIN plug so that the arrows on the plug are pointing downwards.
2. Hold the Handheld in your hand with the controls facing upwards.
3. Insert the plug into the corresponding cable connection socket on the
Handheld.
4. Press the plug firmly into the cable connection socket until the locking device
audibly engages.
The interface cable is now connected to the Handheld.
Connecting the handheld device to the computer using a PS/2 interface
cable
Connect the handheld device to the computer as follows:
1. Switch off the computer.
2. If an external keyboard is connected to the computer, disconnect from the
computer.
3. If you are using a USB keyboard, connect the keyboard to the PS/2 socket on
the interface cable using a corresponding adapter. If you are using a keyboard
with PS/2 plug, connect the plug directly to the PS/2 socket on the interface
cable.
4. Connect the PS/2 plug on the interface cable to the keyboard port on the
computer.
5. Switch on the computer.
After you have connected the handheld device to the computer, it
switches on automatically. The symbols
and
appear in the status
bar.
Power is supplied to the handheld device via the PS/2 interface. This is why you
do not require an additional power supply.
Note!
Required PS/2 interface cable
You will require a PS/2 interface cable with the following connectors to connect
the Handheld to the computer:
■
8-pin DIN connector
for connection to the Handheld.
■
PS/2 socket
for connecting an external keyboard.
■
PS/2 connector
for connection to the computer.
Note!
Connection cable with fitted grip
If you have mounted the Handheld to the optional grip, connect the interface cable
to the cable connection socket on the grip.
