Software description PF_Ident
2597
78 2013-
02
41
9.1.2
Read/Write > Write data
In this menu, you have the option of writing data to a data carrier.
Write data menu
Description of menu entries
Address
In the data input field of the
Address
menu entry, you have the option of changing
the start address.
Start addresses specify the location of the individual data blocks on data carriers.
You can read out specific data blocks and transfer data by changing the start
address.
Defining the start address
Define the start address as follows:
1. Select
Address
.
2. Enter the start address using the input buttons.
3. Press the left selection button to confirm your entry (
).
Number of blocks
In the data input field of the
No. blocks
menu entry, you have the option of
changing the number of blocks.
The number of blocks determines how many data blocks the Handheld reads from
the data carrier and how many data blocks are written to the data carrier. Each
address block contains 4 bytes, i.e. in ASCII format, you can enter 4 characters for
each block in the data input field of the
Data
menu entry, in hexadecimal data
format 8 characters (2 characters each) and in decimal data format 12 characters
(3 characters each).
Submenu
Options
Menu entry
Address
Number of blocks
Data
