2597
78 2013-
02
46
Software description PF_Ident
Changing the number of blocks
Change the number of blocks as follows:
1. Select
Number of blocks
.
2. Press the CLEAR input button to delete the current entry (
).
3. Enter the number of blocks using the input buttons.
Options submenu
Description of menu entries
Copy
You can use the
Copy
menu entry to transfer the data currently being read to the
Data write
menu.
Copy data
Use this option to copy data as follows:
1. Read the data from a data carrier.
2. Press the right selection button after the last read data carrier to exit read
mode (
).
3. Select
Options > Copy
.
If the copy operation is successful, "Data transferred" appears on the
display and the status LED lights up green. If the copy operation fails, a fault
message is output. See see chapter 8
Submenu
Data format
Menu entry
Copy
