2597
78 2013-
02
66
Software description PF_Ident
Control submenu
Description of Menu Entries
Standard read
In the data input fields in the
Standard read
menu entry, you have the option of
defining the start and end address of the data area you wish to read.
Password protect
If password protection is deactivated, data can be written to all data words located
outside of the write-protected area. If you wish to write to a word in this area, the
"word protection" setting must be modified accordingly. If password protection is
activated, data can be written to all data words located outside of the write-
protected area on the condition that the correct password is set and password
mode is activated.
If password protection is deactivated, all data words can be read. If password
protection is activated, the read-protected area is active, i.e. this area can only be
read if the correct password was set using the "Password set" command and
password mode was activated using the "Password mode" command. If the read-
protected area is read when password mode is deactivated, the data is set to "0 x
000".
Submenu
Options
Menu entry
Standard read (starts/end)
PSW protect
User bits
