2597
78 2013-
02
82
Software description PF_Ident
5. Press the right selection button to exit the
Memory
menu (
).
Edit
This command gives you the option of modifying the data record currently
selected.
Modifying data sets
Modify a data set as follows:
1. Press the left navigation button (
) or the right navigation button (
) to ac-
cess the required data set.
2. Press the left selection button (
) to access the options.
3. Select
Modify
.
4. Press the CLEAR input button to delete individual characters (
). In
principle, you can only delete the character last entered, not individual
characters within the string.
5. Enter the required data with the correct syntax for the selected data format
using the input buttons.
6. Press the left selection button to confirm your selection (
).
7. Press the right selection button to exit the Memory menu (
).
Delete
This command gives you the option of deleting the data record currently selected.
Deleting data sets
Delete a data set as follows:
1. Press the left navigation button (
) or the right navigation button (
) to ac-
cess the required data set.
2. Press the left selection button (
) to access the options.
3. Select
Delete
.
If the delete operation is successful, a confirmation message does not
appear on the display. The total number of data sets in the status line on the
display decreases by one.
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data
bytes in decimal data format must contain 3 characters.
