background image

IPT-HH20

Command reference

20

5269

 2

007

-1

2

105

Single write fix code (SX)

Only possible with data carrier types IPC11 and IPC14.

Only one attempt is made to write a fix code. The specified length of the fix code is always 5 
bytes

Single get configuration (SG)

Only possible with data carrier types IPC03 and IPC12.

Only one attempt is made to read a word in the configuration area ("protection word" or "control 
word") from address <ConfAddr>.

Single write configuration (SC)

Only one attempt is made to write a word to the configuration area ("protection word" or "control 
word") from address <ConfAddr>.

Password mode must be activated in the read head to write to the configuration area.

Fill Data Carrier (S#)

The data carrier is filled with <WordNum> data blocks described by fill signs <FillSign> from the 
specified block address <WordAddr>.

Get State (GS)

This command is used to read out permanently stored read/write head settings.

 Command:

SX 

<FixType> <FixLen> <Data>

 Response:

 <Status>

 Command:

SG

<ConfAddr>

 Response:

 <Status><Data>

 Command:

SC

<ConfAddr><Data>

 Response:

 <Status>

Command:

S#

<WordAddr><WordNum><FillSign>

Response:

 <Status>

 Command:

GS

 Response:

 TT: <TagType>, TO:<Timeout>, 
BD:<Baud>

Summary of Contents for IPT-HH20














































































































Reviews: