Software description PF_Ident
20
5269
2
007
-1
2
79
Editing data records
Modify data records as follows:
1.
Press the left navigation key (
) or the right navigation key (
) to open the relevant
data record.
2.
Press the left softkey (
) to open the options.
3.
Select
Edit
.
4.
Press the CLEAR input key (
) to delete individual characters. You can only delete
the last character entered, not individual characters within the character string.
5.
Enter the relevant data in the correct syntax for the data format selected using the input
keys.
6.
Press the left softkey (
) to confirm your selection.
7.
Press the right softkey (
) to exit the Storage menu.
Delete
This command gives you the option of deleting the data record currently selected.
Deleting data records
Delete data records as follows:
1.
Press the left navigation key (
) or the right navigation key (
) to open the relevant
data record.
2.
Press the left softkey (
) to open the options.
3.
Select
Delete
.
A message does not appear on the display to confirm that the delete process was
successful. The only indication is that the total number of data records shown in the status
bar on the display decreases by one.
Note!
Observe the input format
Data bytes in hexadecimal data format must always contain 2 characters and data bytes in
decimal data format must contain 3 characters.