Product Description
2
02
0-
01
7
4
Product Description
4.1
Use and Application
The inductive angular positioning system PMI360DV-F130-3E2-V15 is a measuring system
designed for the non-contact detection of the angular position of valve actuators and valves.
The system offers flexible, user-friendly parameterization functions and is suitable for the uni
-
versal detection and feedback of rotation around a fixed rotation point in all areas of machine
and plant construction.
The PMI360DV-F130-3E2-V15 has 3 switching outputs that can be programmed independently
of one another and that are used to mark 3 important positions (e.g., start, stop, and a third
important position).
The actuator BT-F130-A (see chapter 4.3) is usually attached to the rotary system component
to detect the position. This actuator rotates in the central hole on the PMI360DV-F130-3E2-V15
and contains the metal insert required for detecting the position. The component is optimally
adapted to the mechanical requirements of valves and valve actuators.
Note
In principle, the actuator BT-F130-A is not required. A damping element made from
construction steel such as AR (previously St37-2) must then be mounted on the rotary
system component. This damping element must fulfill all requirements relating to the material,
dimensions, and distances to the inductive angular positioning system PMI360DV-F130... See
chapter 5.2
