2
0
2
0
-0
3
10
Product Description
EtherNet/IP: LED status indicator
Net Status:
Mod Status:
Power:
The "Power" LED lights up green: This LED is directly connected to the supply voltage of the
serial interface (RS232/422/485).
Link/Activity P1:
The "Link/Activity Port 1" LED is directly activated by the Ethernet controller and lights up green
when the interface module at port 1 is on a working network. When there is data traffic on the
network, the LED flashes green at the same speed as the sent/received data.
Link/Activity P2:
The "Link/Activity Port 2" LED is directly activated by the Ethernet controller and lights up green
when the interface module at port 2 is on a working network. When there is data traffic on the
network, the LED flashes green at the same speed as the sent/received data.
"Net Status" LED
Interface state
Flashes green/red
Self-test
Lights up green
Connection present, data exchange is active
Flashes green
Waiting for a connection to be established
Flashes red
Connection has timed out
Lights up red
IP address assigned twice
Table 2.3
"Net Status" LED display
"Mod Status" LED
Interface state
Flashes green/red
Self-test
Lights up green
Data exchange active
Flashes green
Standby/module waiting for connection
Flashes red
Module error
Lights up red
Serious module error
Table 2.4
"Mod Status" LED display
