Pepwave Surf AP 200 Setup Manual Download

Page: 1 / 5

How-to Document

PePWave Surf AP 200 and 400

Wirelessly Connecting a Home Network

Wirelessly Connecting a Home Network with PePWave Surf AP 200 and 400

I n t e g r a t e d H o m e W i - F i A c c e s s P o i n t S e t u p G u i d e

Overview

This guide presents a brief introduction, and a step-by-step process, to

configure a basic setup for the Integrated Home Wi-Fi Access Point

functionality of PePWave Surf AP 200 and 400.

Prior to carrying out the setup procedure in this

guide, the process of connecting PePWave Surf

AP 200/400 with Citywide Wi-Fi must have been

successfully performed.

The high-level steps are as follows:

Set up Integrated Home Wi-Fi Access

Point on PePWave Surf AP 200/400

Configure Wi-Fi enabled host PC(s)

Test the Wi-Fi connection(s) with PePWave Surf AP 200/400

Integrated Home Wi-Fi Access Point – Introduction

Integrated Home Wi-Fi Access Point functionality of PePWave Surf AP 200/400 allows

802.1b/g devices on customers’ premises to wirelessly connect with a PePWave Surf

AP 200/400 unit through which Citywide Wi-Fi is accessed. With PePWave Surf AP

200/400, the already existing Ethernet capabilities of the PePWave Surf Series

remain unaffected.

Figure 1 – PePWave Surf AP 200/400 and Integrated Home Wi-Fi Access Point

Summary of Contents for Surf AP 200

Page 3: ... In the section AP Settings select the radio button labeled Configure Manually Upon the selection further configuration parameters are displayed Figure 3 The AP Settings section on the CPE Setup page Figure 4 Further configuration parameters are displayed upon the selection of the Configure Manually radio button ...