Pequod Acoustics Srl.
Via del Madonnone 25, Florence, Italy
www.pequodacoustics.com
info@pequodacoustics.com
B) 2x Ovoid15 (in parallel, close to each other)
(see fig. Below):
1x Main cable between Ovoid 15 and amp, made
with 2-pole cable.
Terminals made with NL4 male connectors
(+ 1 / -1 connected + 2 / -2 empty), terminal
towards the amplifier made with NL4 male con
-
nector (+ 1 / -1 connected to +1 red and -1 black
on the amplifier and + 2 / -2 empty). Sections of
poles: 2.5 sq mm minimum section per pole up
to a cable length of 15 m, in addition we recom-
mend switching to 4 sq mm per pole.
1x Secondary cable, 2-pole, which connects the
2 Ovoid 15s together.
Terminals made with NL4 male connectors
(+ 1 / -1 con 2 / -2 empty). Sections of
poles: section 2.5 mmq per pole and cable len-
gth of about 1.5 m
Parallel Connection
Ovoid
Ovoid
NL4FC
NL4FC
NL4FC
NL4FC
2p
2p
IN
IN
DSP general settings:
Band pass:
High-pass filter @ 30Hz, 24 dB / oct.
Low pass filter @ 100-120Hz, 24 dB / oct.
Gain and Time Alignment: it depends on Satel-
lite utilized
USER GUIDE
