PERCo RTC-15.3, Assembly And Operation Manual Warranty Card

Assembly and Operation Manual 

10. Connect the half-frames in the zone of the upper power tube with bolts M6×20 – 5 pcs. 

(wrench SW5) to obtain a sturdy construction. Use plugs for the bolt holes. 

11. Check all threaded connections of the canopy frame and tighten them. 

12. Set the jointing plate into working position, fixing it with 4,2×16 self-tapping screws (4 pcs.), 

having preliminary drilled the holes by drill Ø3,5 (see Figure 6). 

Figure 6 The top view of the connected half-frames #1 and #2  

with the installed jointing plate 

The canopy is installed. Consult with PERCo Technical Support Department when necessary. 

8  TRANSPORTATION AND STORAGE 

The canopy in the standard delivery set (Section 4) is packed in three transport boxes, which 
protect its components from damage during transportation and storage. 

Table 1 Overall dimensions and boxes contents 

№

Dimensions 

(Length × width × height) 

Contents 

Weight (gross), 

not more than 

1 191×126×57 

Canopy’s half-frame #1 assembled - 1 pcs. 
Jointing plate - 1 pcs. 
Fasteners – 1 kit 

45 

2 

191×126×57 

Canopy’s half-frame #2 assembled - 1 pcs. 

44 

3 

223×53×31 

Posts – 4 pcs. 

21 

The canopy in the original package should be transported only in closed freight containers or other 
closed type cargo transport. 

During storage and transportation the boxes can be stacked no more than 2 layers high. 

10