perco.com linkedin.com/mwlite/company/perco export@perco.com +7 (812) 247-04-64
•
operation of the turnstile from RC-panel, WRC, ACS
•
built-in control units for each passage zone
•
lock-chamber mode is available
•
power and control cables can be routed to the turnstiles through the special cable duct
and through the top channel
•
turnstiles can be installed close to each other without gaps and connected elements
including installation under canopies
•
reverse rotation locking – prevents reverse rotation of the rotor once the rotor has been
turned more than 60°.
•
Fire Alarm control input that allows connecting the emergency unlocking device (for
example, fire alarm system)
Mechanical unlocking with
a key
LED indication
•
each passage direction of both passage zone features
mechanical unlocking with a key
•
built-in hyperluminous LED indicators of the passage grant /
denial
•
built-in walkway downlights (four 4W LED lamps)
•
optional matching canopy protects the turnstile from
precipitations and climbing over
•
turnstile can be installed on loose ground using optional
mounting frame
•
high corrosion resistance provided by galvanized and powder
coated elements guarantees a long service life in adverse
environmental conditions; "S" version is equipped with a
stainless steel rotor
•
two control modes – pulse and potential
•
possibility to connect an intrusion detector and a siren to the
turnstile
The turnstile, with regard to resistance to environmental exposure, complies with GOST 15150-
69 category N2 (operation outdoors). The operation of the turnstile is allowed at ambient
temperature from -40°C to +55°C and relative air humidity up to 98% at + 25°C. Top channel
protection class – IP54.
RC-panel, with regard to resistance to environmental exposure, complies with GOST15150-
69 category NF4 (operation in premises with climate control). RC-panel should be operated
at ambient air temperature from +1°C to + 55°C and at relative air humidity of up to 80% at
+25°C.
Finish – galvanized powder-coated steel; "S" version features a stainless-steel rotor.
Colour – blue. Powder coating to RAL colours is available on order.
It is a serially produced product certified for compliance with applicable Russian and
European CE standards.
Delivery set
Operating
conditions
Design
Main features
Top channel with cover
1
Rotor section with hardware kit
3
Guide barrier set with indication block and indication cable assembly
2
Supporting girder of the guide barrier set
1
Section divider
2
Upper girder of the section divider
1
Lower rotor support with bottom rotation unit
1
Cable duct for cable laying from the bottom
1
Keys to mechanical release locks
8
RC-panel with cable
1
RTD-20 Full height rotor turnstile
