perco.com linkedin.com/mwlite/company/perco export@perco.com +7 (812) 247-04-64
Optional equipment (upon request)
RF20 foundation frame
1
RTC-20 canopy
1
WHD-16 Full height security gate
1
MB-16 full height railing sections
1
Attaching plates and brackets for coupling turnstiles, railings, security gates, etc.
required
number
WRC (consisting of a receiver and transmitters in the form of key fobs) with a range of up to
40 m
2
Turnstile power supply (24 V DС)
1
Walkway downlights power supply (12 V DС)
1
М10×60 bolt with PFG IR 10-15 anchor (SORMAT company, Finland)
24
М16×100 bolt with PFG IR 16-25 anchor (SORMAT company, Finland)
1
Technical
specifications
Operating voltage
turnstile
24 – 2.4 V DС
walkway downlights
12±1.2 V DC
Current consumption for each passage zone
RTD-20.1
max 4.5 A
RTD-20.2
max 1.2 A
walkway downlights
max 0.8 A
RTD-20.1
max. 105 W
Power consumption current for each turnstile
RTD-20.2
30 W
walkway downlights
10 W
Throughput rate for each passage lane
in the single passage
mode
20 persons / min
in the free passage
mode
30 persons / min
Overall dimensions
without canopy
2480х1595х2303 mm
with RTC-20 canopy
2485х1840х2558 mm
Turnstile weight
RTD-20.1
max. 370 kg
RTD-20.2
max. 375 kg
Width of each passage zone
630 mm
Mean time to failure for each passage zone
2,000,000 passages
Mean lifetime
8 years
Connection
Control units are located in the top channel in the upper part of the turnstile. External cables are
connected to the DIN-rail located inside the top channel.
Cables are routed to the DIN-rail: from below through the cable duct (included in the delivery
set), on top through the cable bushings at the front end of the top channel or between two
turnstiles through the special bracket.
Documentation set: Certificate and Operation manual
1
HDF marking template
1
Spare parts, accessories and hardware kit
1
RTD-20 Full height rotor turnstile
