PERCo TTR-04CW-24, Assembly And Operation Manual

TTR-04CW-24 Electromechanical Tripod Turnstile  

3 

Dear customers!

We thank You for choosing the turnstile manufactured by PERCo.  

You have purchased a high quality product, which will be long lasting  

in operation provided that installation and operation rules are observed. 

The assembly and operation manual (hereinafter - the Manual) for the 

TTR-04CW-24

electromechanical tripod turnstile (hereinafter - the turnstile) contains data that is 
necessary for the most full use of operating advantages of the turnstile as well as chapters 
on packaging, installation and maintenance. 
Only qualified personnel, following the instructions of this Manual, must carry out 
installation and maintenance. 
Abbreviations: 



  ACS – access control system;  



  SPS – standby power supply; 



  CU – control unit; 



  RC panel – remote control panel; 



  WRC – wireless remote control. 

1 APPLICATION 

The turnstile is designed for managing pedestrian flows at entrance points of industrial 
facilities, banks, administrative buildings, retail outlets, railway terminals, airports, etc. 
To ensure fast and convenient passage it is recommended to install one turnstile per 500 
people working the same shift or on the basis of maximum working load 30 persons/min. 

2 OPERATION CONDITIONS 

The 

T-04W-24 

turnstile housing (hereinafter – 

the turnstile housing

) with regard to 

resistance to environmental exposure complies with GOST 15150, category U2 (for an 
outdoor sheltered application or in premises without climate control). This is ensured by 
additional corrosion-resistant zinc coating of the housing and by the built-in heating system 
with thermocontrol. The barrier arms are made of stainless steel as standard. 
Operation of the turnstile housing is allowed at ambient air temperature from -40°

С

 to 

+40°

С

 and at relative air humidity of up to 98% at +25°

С

. 

The CU-02N control unit (hereinafter – the control unit) and remote control panel 
(hereinafter – the RC panel) with regard to resistance to environmental exposure complies 
with GOST 15150, category NF4 (operation in premises with climate control). 
Operation of the control unit and RC panel is allowed at ambient air temperature from 
+1°

С

 to +40°

С

 and at relative air humidity of up to 80% at +25°

С

.