background image

WHD-16 Full Height

 

Security Gate 

6  MARKING AND PACKAGING 

The gate marking contains the product name, its date of manufacture and serial number. 
Optional  accessories  and  items  are  marked  according  to  their  respective  technical 
documentation. 

The standard delivery set is packed into a package box to protect the gate from damage 
during storage and transportation. 

Box overall dimensions (L × W × H) ...........................................................  221×130×24 cm 
Grosse weight  ....................................................................................................  max. 90 kg 
 
 
 
 
 
 

7  SAFETY REQUIREMENTS 

7.1  Installation safety requirements 

The installation should be carried out only by the qualified personnel after careful study of 
this 

Manual

 

Warning! 

  All  the  cables

 

should  be  connected  up  when  the  power  supply  is  switched  off 

from the AC mains. 

  Only serviceable tools should be used for installation. 
  Observe general electrical safety rules when laying out the cables. 
  Before the turnstile first power on make sure its installation and connection have 

been made accordingly. 

Power supply unit installation must be made in accordance with the safety rules stipulated 
in its certificate. 

7.2  Operation safety requirements 

Observe general electrical safety rules when operating the electromechanical lock. 

 

Warning! 

  Do not use the gate under conditions that do not comply with the requirements 

of Chapter 2 of this Manual. 

  Do  not  use  the  electromechanical  lock  at  supply  voltage  that  does  not  comply 

with the requirements of Chapter 3 of this Manual. 

  To  avoid  injuries 

–  do  not  step  or  hang  on  the  gate  crossbeams,  do not  pass 

hands or legs between the wicket elements during the gate operation etc. 

Safety  requirements  on  the  power  supply  units,  electromechanical  lock  and  door  closer 
operation are shown in their certificates. 

Summary of Contents for WHD-16



















Reviews: