Visit our site
Please
Recycle
Bird Nesting Box
Assembly Instructions
PERDIX Wildlife Supplies. Unit 1 Hatton Rock Business Park,
Hatton Rock, Stratford-Upon-Avon, CV37 0BX. UK
Tel: +44 (0)1789 336123 www.perdixwildlifesupplies.com
WOOD
GLUE
TOOLS
RE
QUIRED
CONTENT
S
8mm Ratchet
or Box Spanner
BACK
Screw holes at the bottom
2 x SIDE
BASE
ROOF
DOOR
Machine Head Screws, Nut & Washer
40 mm Wood Screws x 18
50 mm Wood Screws x 2 (for hanging)
MOUNT
POS
T
Optional PVA
Wood Glue
(Recommended on
all fixed edges)
Non-Toxic
Weatherproof
Finish
(Exterior of the
nest box only)
PZ2 Pozi drive
Screw Driver
x2
x2
x4
Place the back onto a flat
surface with the screw
holes at the bottom
and the bevel as
shown.
1
2
3
4
5
Attach the first side with 2 x
40mm screws, making sure it
is square with the
bevelled top.
Repeat with the
second
side.
Turn over and put the final
two 40mm screws for fixing
the base.
Using the two machine head
screws, nuts and washers
affix the mount post as in
the diagram.
Push in the base all the way
making sure it is flush with
back and sides. Then fix with
four 40mm screws.
WOOD
FINISH
