EHR1200
3
PEREL
5. Connection
This device is intended for wall mounting with a permanent electrical connection.
•
Once the power cord is inserted through the wall support, attach the support by means of the supplied screws and
dowels.
•
Remove the screw (B) from the cable clamp.
•
Place the cable in the provided seat.
•
Make sure that the wires correspond to the stamped symbols of the support.
o
The wires in the mains are coloured in accordance with the following code: green and yellow (earth), blue
(neutral), brown (live).
o
Connect the green and yellow wire to the E terminal ( symbol).
o
Connect the blue wire to the N terminal.
o
Connect the brown wire to the L terminal.
•
Clamp the wires to the cable holder by means of the screw (B).
•
Replace the cover on the wall support and fasten it with the appropriate screw.
•
Slightly loosen the screw (A) which determines the inclination of the angle.
•
Choose the desired inclination and fasten the screw (A).
6. Use
Switch on the device:
0: OFF
1: 600W
2: 1200W
Switching on the device can be accompanied by slight vibrations which will gradually fade away. Do not be
alarmed. This is absolutely normal.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
3. Disconnect the device from the mains prior to maintenance activities.
4. Wipe the device regularly with a moist, lint-free cloth and neutral detergent. Do not use abrasive cloths or
products that could affect the outward appearance of the device. Make sure that the parts exposed to the heat
rays and the ventilation are free of dust and dirt. Do not touch the quartz heating elements.
5. There are no user-serviceable parts.
6. In case of breakdown and/or poor function of the device, disconnect it from the power supply and contact an
authorized service centre.
7. Contact your dealer for spare parts if necessary.
8. Technical Specifications
Power Supply
max. 230Vac/50Hz
Heating Power
600W / 1200W
Dimensions
590 x 520 x 305mm
Total Weight
1.4kg
The information in this manual is subject to change without prior notice.
