VTSS210
V. 01 – 29/08/2016
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2.
Safety Instructions
This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
Do not crimp the power cord and protect it against damage.
Warning!
If the power cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage stated in the
specifications of this manual.
Plug the power cord into a suitable,
earthed
mains outlet.
Risk of electroshock
when opening the cover. Touching live wires can cause life-
threatening electroshocks. Do not disassemble or open the housing yourself. Have the
device repaired by qualified personnel.
Do not operate the device with wet hands.
Always disconnect mains power when the device is not in use or when servicing or
maintenance activities are performed. Handle the power cord by the plug only.
Caution!
After switching off,
leave the power cord plugged in
for a few minutes.
When you switch off the unit, the automatic cooling function blows cooling air through
the heater pipe for a short period. This protects the heater from damage and extends
its lifetime. Do not disconnect the mains plug during this cooling process.
Indoor use only
. Keep this device away from rain, moisture, splashing and dripping
liquids. Never put objects filled with liquids on top of or close to the device.
Do not use near inflammable products or in explosive atmospheres. Heat can cause
fire to inflammable products even when they are not in sight. Only use in properly
ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can cause serious burns. Keep the
tips and hot air away from the body, clothes, or other flammable material. Do not aim
the hot air gun at the eyes. Use gloves and/or heat-resistant tools to pick up the PCB
assembly to prevent burns. Always return the irons and gun to their stands between
uses; always let the device cool down after use and before storage.
Place the device on a level, stable, and fire resistant working surface.
Do not inhale solder fumes. The vapours that are released during soldering are
harmful. Therefore, you shall only use the soldering station in well-ventilated areas or
under an exhaust hood (solder fume extractor). Dispose of fume filters and solder
residue in accordance with local regulations.
