PTC0004
V. 01 – 01/04/2019
7
©Velleman nv
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
operating panel
6
temperature/timer –
2
indicator light
7
on-off switch
3
air outlet
8
mode button
4
LED display
9
oscillation button
5
temperature/timer +
6.
Installation
The heater shall be used as a portable appliance only. Install vertically on a flat, dry,
stable and non-slippery surface.
7.
Operation
1.
Connect the appliance to the mains.
2.
Switch on the appliance with the on-off button. The appliance will work
3.
Choose the fan mode with the mode button:
o
regular fan mode (3 blue LEDs)
o
warm fan mode (1 red LED)
o
hot fan mode (3 red LEDs).
4.
Switch on/off the oscillation function with the oscillation button.
5.
Press +/– to set the temperature.
6.
Hold the mode button pressed for 3 seconds to switch on the timer. Set the timer
(up to 9 hours) with +/–. The display will flash 4 times to confirm the setting. The
heater will automatically switch off after the set time has elapsed.
7.
Switch off and disconnect the appliance from the mains after use.
This appliance is equipped with a tilting protection, which automatically switches off the
heater when it is pushed over. To restore the heater, re-install in the proper vertical
position.
