VTBAL200
V. 01 – 19/10/2018
3
©Velleman nv
4.
Operation
4.1
General Operation
Place the scale on a solid, level and non-slippery surface.
Pump the start button once with your foot. Please wait until the display shows 0.0.
The scale automatically switches off after one minute.
4.2
Remarks
The factory default unit is kg. Set the desired weighing unit with the switch in the
back of the scale.
Err appears on the display if the scale is overloaded.
Low battery power. Reload by pumping the start button.
Unit selection (please set unit before weighing).