Wired Audio Playback
Once the installation is completed.
1.Turn on the speakers (Power switch ON/OFF in the “ON”)
2.Connect your audio source to the speakers using the RCA / 3.5 mm audio cable.
You can start playing music in your device.
3.Control the volume with the knob located at the top corner of the right speaker.
The knob is marked with “ – ”.
NOTE: Make sure the LED marked with “LINE IN” on the top of the speakers is on.
Bluetooth
®
Audio Playback
1. Turn on the speakers and wait for the LED marked with “ ”starts blinking in red
and blue.
2. The speakers are ready to synchronize or pair with your Bluetooth® device. To pair
the speakers follow the steps specified in your Bluetooth®, Smartphone or tablet
user manuals.
3. If your device requires a passkey, type “0000” (four zeros).
4. Now your devices should be paired. If not try again steps 1 to 3.
5. Once you are connected to your Bluetooth® device, change the audio source
using the button marked with “Source”. The LED marked with “Bluetooth” should
turn on.
