Charging
1. Connect one end of the USB cable to the headset and the other end to a computer
or to an USB power adapter.
2. While battery is charging the red LED indicator will be turn on. When the battery is
fully charged, the red LED indicator will turn off.
Note: Your device has a built-in rechargeable battery so you should charge it for at
least 3 hours before the first use.
Functions
Turn “ON” and “OFF”
Press the “MFB” button for 3 seconds to turn it on. Your device will beep and the
LED indicator will blink in blue 3 times.
To turn it off, press the “MFB” button about 3~6 seconds. Your device will beep and
the LED indicator will blink in red 3 times.
Pairing
1. While the headset is OFF press and hold MFB button for about 6 seconds until the
LED indicator blinks red and blue.
2. Set a Bluetooth® device in paring mode. (Check the device user manual for
reference).
