6. BUTTON INSTRUCTIONS
P.9
6.5 MEM Button:
Press button to save readings on the LCD screen. The “ ” symbol
lights up on the screen for 2 seconds. Press the button again to store
next group readings. The store readings on the LCD screen for 00~99
group.
6.6 RECALL Saved Reading Button:
Press the button to recall saved readings. The “ ” symbol lights
up on the screen.
Note:
When the meter is during connection section, this function is
disabled. Press the , , , or button to select MEM group. The
LCD shows “
hour:minute:second
” on the screen for 2 seconds, and
then shows the readings. Press or button to exit RECALL mode.
6.7 MAX/MIN/AVG Button:
Under this mode, the unit simultaneously monitors and stores the
maximum, minimum and average value in the memory. The unit will
keep updating/refreshing the data.
To start:
1.
Press button. “ ” symbol lights up on LCD, the reading shows
the maximum data.
2.
Press button again to show minimum data; the “ ” symbol
lights up on LCD.
3.
Press button again to show average data; the “ ” symbol lights
up on LCD.
4.
Press button again, the “ , and ” symbol blinks together,
the readings shows real time data.
