4
GB
A
B
C
D
E
LCD Display
AM/FM band indicator
RDS indicator
Loudness indicator
Low battery indicator
Text display
Power the radio
Note:
No batteries are included with this radio.
1. Battery operation
1. Installing the batteries, first turn battery cover fixture anti-clockwise to loosen and open the battery
cover.
2. Insert 4 X C size (UM-2) battery into the compartment. Ensure the batteries are inserted in
accordance with the diagram shown. Close the battery cover and fasten the fixture by turning
clockwise. If the radio is not to be used for any extended period of time, it is recommended that
the batteries are removed from the radio. Reduced power, distortion and a “stuttering sound“ or
low battery sign is flashing on the display are all signs that the batteries need replacing.
Note:
Do not use a mix of old and new batteries.
Do not use a mix of full and empty batteries.
Do not use batteries that have a different mAh
capacity Do not use damaged or leaking batteries
When playing on (rechargeable) batteries the
output power is less compared to the output
power when playing on AC mains power. Because
of this the sound can be somewhat distorted at
the higher volume settings.
2. AC operation
Before you plug the AC cord into the AC
socket, be sure the voltage is correct. If you
have batteries in the radio and use the AC
power cord, the batteries will automatically be
disconnected.
AC cable hook is designed to store the cord
when the radio is not in use.
