Auto update
The radio can receive the latest time information from either DAB + or FM signal, then
synchronise the current date/time of the radio.
1. Press the
ON/OFF button
to switch on the radio.
2. Press the
MENU button
to display current menu.
3. Rotate the
TUNING/SEEK/SELECT knob
to select “System settings” and press the
knob to enter system menu.
4. Then “Equaliser” will be displayed, rotate the
TUNING/SEEK/SELECT knob
to
select “Time/Date” and press the knob to confirm.
5. Rotate the
TUNING/SEEK/SELECT knob
to select “Time auto update” and press
the knob.
6. Rotate the
TUNING/SEEK/SELECT knob
to select
“Update from DAB” Radio will automatically synchronize the date/time from current
DAB station.
“Update from FM” Radio will automatically synchronize the date/time from current
FM station.
“No update”
Radio will stop updating date/time from any of the radio
stations.
7. Press the knob again to confirm and finish setting.
Note:
If reception is good and you have selected the “Update from DAB” or “Update
from FM” option from Auto Update option, the time will be automatically updated. Time
synchronisation can take several minutes. The automatic time setting is always activated
when the radio is switched from standby to last played radio mode.
BRIGHTNESS
LCD brightness configuration
1. Press the
ON/OFF button
to turn on the radio.
2. Press the
MENU button
, and rotate the
TUNNING control
to the “System settings”.
Then, press the
TUNNING control
;
3. Rotate the
TUNNING control
to the “Brightness”.
4. Press the
TUNNING control
to enter the LCD brightness adjustment menu.
5. Rotate the
TUNNING control
to select “Normal” for the LCD brightness level while
the radio is playing;
6. Or rotate the
TUNNING control
to select “Standby” to setup the brightness level of
the unit in standby mode.
7. Press the
TUNNING control
to confirm your choice.
Note:
When in battery standby, the radio will be turned off to save power. At that
moment, the LCD will also be turned off. When the radio is connected to mains AC
power again, the last user setting will be applied again.
19
