The hoods of series DNS 6753 B 1100 LED Strip, DNS 9753 B 1100 LED Strip lighting
system may consists of one LED Strip lamp of 3/6 W power.
Replacing light bulbs
To replace the lamp, follow these steps:
1. Turn off the hood from the electricity network.
2. Remove the aluminum filter (Pic.13).
3. Remove the old bulb.
4. Insert a new bulb with the same values.
5. Connect the hood to the mains.
Regular maintenance and cleaning ensure high performance and reliability and continued
appliance service life. Pay special attention to the fact that the grease filter and activated
carbon filters should be replaced according to the manufacturer’s recommendations.
6. LIGHTING
7. CLEANING AND USING
Pic. 13
Pic. 14
The lowest and the average speeds are used under normal conditions and at low intensity
exhalations, the highest rate is used in high concentrations of vapors such as frying. Consider
this to turn on the relevant hood speed. It increases the efficiency of hood.
Engine speeds
Summary of Contents for DNS 6753 B 1100 LED Strip
