Performa Racing Crawler Combo, Instruction Manual

12 

Copyright Performa Racing © 2019

SETTINGS
Standard parameters can be modified using the setup 

button located on the switch.

Running mode

1. “Forward Only with Brake” this mode is meant for racing. 

In this mode the car can go forward and brake, there is 

no reverse.

2. “Forward/Reverse with Brake” in this mode the car can go 

forward, brake and reverse. If the car is moving forward 

and you go into reverse, the car will first brake and 

stop, then you need to release the throttle and go into 

reverse again for the car to go backwards. While braking 

or in reverse, if you accelerate, the car will immediately 

accelerate forward.

3. “Forward/Reverse” 

This mode is meant for Rock Crawlers. In this mode there 

is no brake function, the car goes from forward to reverse 

or reverse to forward immediately without any pause 

Note: Do not use this mode with other car types as it can 

overload and/or damage the ESC.

Drag Brake Force 

Sets braking power applied when the throttle is returned 

at the neutral position.  A higher drag brake setting means 

stronger hold or hill brakes.

Note: stronger brakes cause more load on the drivetrain 

and heat output will be increased, use with caution.