background image

6 TON HYDRAULIC BOTTLE JACK

OWNER’S MANUAL

Item Number W1625

WARNING

It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance 

instructions contained on the product label and instruction manual prior to operation of this hydraulic bottle 

jack. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and 

while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English, 

the product warnings and instructions shall be read and discussed with the operators’ native language by the 

purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information 

shall be emphasized and understood prior to usage. The hydraulic bottle jack shall be inspected per the 

operating instructions.
Users of this hydraulic bottle jack must fully understand these instructions. Each person operating this 

hydraulic bottle jack must also be of sound mind and body and must not be under the influence of any 

substance that might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage! 

If you encounter any problems or difficulties, please contact our customer service department at:

1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time. 

Summary of Contents for W1625









Reviews: