6 in. Bench Grinder
with Worklight
W50001
OWNER’S MANUAL
SAVE THIS MANUAL
Table of Contents
Safety Instructions_________________________________________2
Bench Grinder Safety_______________________________________3
Electrical Requirements_____________________________________3
Replacement Parts List______________________________________4
Bench Grinder Assembly ____________________________________4
Maintenance_______________________________________________5
Warranty__________________________________________________6
Maximum HP developed
1/2
Volts
115
Hertz
60
RPM
345 0(no load speed)
GRINDING WHEEL SIZE
6 in. X 3/4 in. X 1/2 in.
GRINDING WHEEL GRIT
36, 60
LEFT & RIGHT TOOL RESTS
LEFT & RIGHT EYE SHIELDS AND ASSEMBLIES
LEFT & RIGHT SPARK GUARDS
PROTECT YOUR EYES.
The operation of any power tool can
result in foreign objects being thrown
into the eyes which can result in
severe eye damage. Always wear eye
protection during power tool operation.
SAFETY GLASSES
PLEASE WEAR
FORESIGHT IS BETTER
THAN NO SIGHT
To avoid electrical shock to yourself and
damage to the bench grinder, use proper
circuit protection.
The Bench grinder is factory wired for 115V,
60 Hz operation. Connect to a 115V, 15 amp
branch circuit and use a 15 amp time delay
fuse or circuit breaker. The electrical circuit
can not have any wire size less than #12. To
avoid shock or fire, replace power cord
immediately if it is damaged in any way.
SPECIFICATIONS
