SAFETY INFORMATION
• READ THE ENTIRE MANUAL.
• GROUND ALL TOOLS. Any tool supplied with a 3-prong plug must be
plugged into a 3-contact electrical receptacle. The 3rd prong is used to
ground the tool and provide protection against accidental electrical shock.
Never remove the third prong.
• AVOID DANGEROUS ENVIRONMENTS. Do not use power tools near
gasoline or other flammable materials, in damp or wet locations or expose
them to rain. Keep work area well lit. Normal sparking of the motor or
sparking from grinding metal could ignite fumes.
• KEEP WORK AREA CLEAN. Messy areas and cluttered work benches
invite personal injury and or property damage.
• KEEP CHILDREN AND VISITORS AWAY. All children should be kept away
from the work area. Maintain a safe distance for any person near the work
area. Adults near the work area must wear safety glasses. DO NOT let
children handle the power tool or extension cord.
• DRUGS, ALCOHOL, MEDICATION. Operating any tool or equipment under
the influence of drugs, alcohol, and or medication can cause personal
injury to yourself and others.
• WEAR PROPER APPAREL. Remove your jewelry before using tool. DO
NOT wear loose clothing, neckties, rings, bracelets, or other jewelry which
may get caught in moving parts. Non skid footwear and non-electrically
conductive gloves are highly suggested while working. Wear protective hair
covering to contain long hair.
• PROTECT YOUR EYES.
The operation of any power tool can result in foreign objects being thrown into
the eyes which can result in severe eye damage. Always wear eye protection
during power tool operation. Eyeglasses are not always safety glasses.
• BE RESPONSIBLE FOR YOUR HEARING AND BREATHING. Wear
hearing protection during extended periods of operation. Protect your
lungs by wearing a clean face or dust mask.
• GUARD AGAINST ELECTRICAL SHOCK. Avoid body contact with
grounded surfaces such as pipes, radiators, ovens, stoves and refrigerator
enclosures.
• USE THE RIGHT TOOL. Use tools properly and for its intended task.
DO NOT force a small tool to do the job of a heavy duty tool. Using the right
tool to do the right job will do the job intended and safer.
• CHECK DAMAGED PARTS. Before use of a tool it should be carefully
checked to assure that it will operate properly and perform its intended
function. Check for misalignment or binding of moving parts, breakage of
parts, mounting, or any other conditions that may affect its operation. A guard
or other part that is damaged should be properly replaced.
BEFORE USING YOUR BENCH GRINDER
• AVOID UNINTENTIONAL STARTING. Be sure that your power tool is in the
“OFF” position before plugging it into a power cord or electrical receptacle.
• STORE ALL MAINTENANCE TOOLS away from the immediate area prior
to turning “ON” your bench grinder.
• DO NOT OVERREACH. Proper footing and balance is a must at all times
while using the tool. Unstable support may lead to personal injury.
• NEVER LEAVE TOOL RUNNING UNATTENDED.
ALWAYS turn the power to the “OFF” position and do not leave the tool
until it comes to a complete stop.
• USE RECOMMENDED ACCESSORIES. Consult the owners manual for
recommended accessories. The use of improper accessories may
cause risk of injury to yourself and others.
• ALWAYS MAKE SURE THE TOOL IS IN THE “OFF” POSITION AND
UNPLUGGED from the electrical receptacle when making
adjustments, changing parts or performing any maintenance,
• KEEP PROTECTIVE GUARDS IN PLACE AND IN PROPER WORKING
CONDITION.
• MAINTAIN TOOLS WITH CARE. Tools function better and safer when
kept clean and ivvvn good working condition. Keeping the tool clean,
dry, free of grime will add to its life and performance.
• EXTENSION CORD GUIDELINES. Use only 3-wire extension cords that
have 3-prong grounding type plugs and 3 prong receptacles that accept
the tool’s plug. Only UL listed extension cords should be used with this
product. Improper use of extension cords may cause inefficient operation
of your tool which can result in overheating. Be sure your extension cord is
rated to allow sufficient flow to the motor. Refer to guide below for
minimum gauge for extension cords.
EXTENSION CORD LENGTH
WIRE SIZE (A.W.G.)
Up to 25 feet
18
26 to 50 feet
16
51 to 100 feet
14
The use of an extension cord heavy enough to carry the current a tool will
draw is very important. Especially when the power source is of great
distance. A extension cord that is insufficient will cause a drop in line
voltage, resulting in power loss and causing the motor to overheat. When
the project requires you to be outdoors, use an extension cord designed
for outdoor use. The letters “WA” are indicated on the jacket of the cord.
2
Carefully read through the entire owner’s manual before operating your bench
grinder. Keep manual with important records for safety instructions, operating
procedures and warranty.
WARNING: When using electrical tools, machines or equipment, basic
safety precautions should always be followed to minimize the risk of fire,
electrical shock or personal injury to yourself and others.
ELECTRICAL REQUIREMENTS
CONNECTING TOOL TO POWER SOURCE OUTLET
This machine source must be grounded while in use to protect the operator
from electric shock. In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of
electric shock. This tool is equipped with an electric cord having an
equipment grounding conductor and a grounding plug. The plug must be
plugged into a matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Improper connection of the equipment grounding conductor can result in a
risk of electric shock. The conductor with insulation having an outer surface
that is green (with or without yellow stripes) is the equipment grounding
conductor. If repair or replacement of the electric cord or plug is necessary,
DO NOT connect the equipment - grounding conductor to a live terminal.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the receptacle,
have the proper receptacle installed by a qualified electrician.
Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to if the tool is
properly grounded.
To avoid electrical shock to yourself and damage to the bench grinder,
use proper circuit protection. The Bench grinder is factory wired for
115V, 60 Hz operation. Connect to a 115V, 15 amp branch circuit and use
a 15 amp time delay fuse or circuit breaker. The electrical circuit can not
have any wire size less than #12. To avoid shock or fire, replace power
cord immediately if it is damaged in any way.
Fig. A
This tool is intended for use on a circuit that has an outlet that looks like the
one illustrated in Figure A. The tool has a grounding plug that looks like the
one also shown in Figure A. DO NOT modify the plug provided if it will not fit
the outlet. Have the proper outlet installed by a professional electrician.
WARNING: If not properly grounded, this power tool can incur the
potential hazard of electrical shock particularly when used in damp locations
or in proximity to plumbing. If an electrical shock occurs, there is the potential
of a secondary hazard such as your hands contacting the grinder tool.
