SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL
INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
1. Always use common sense and pay particular attention to all
the DANGER, WARNING, CAUTION and NOTICE statements
of this manual. The safety instructions provided are not in-
tended to cover all possible conditions and practices that may
occur when operating, maintaining and cleaning power tools.
2. Observe work area conditions. Do not use machines or power
tools in damp or wet locations. Don’t expose to rain or snow.
Keep work area well lighted. Do not use electrically powered
tools in the presence of flammable gases or liquids. Do not
bring combustible materials near the tools. Power tools create
sparks, which may ignite the dust or fumes. Do not immerse
tool in liquids. Keep work area clean, well ventilated and well
lit. Cluttered work areas invite accidents.
3. Use personal protective equipment. Wear ANSI approved
safety goggles. Protective equipment such as dusk mask, non-
skid safety shoes, hard hat, heavy duty work gloves or hearing
protection used for appropriate conditions will reduce personal
injuries.
4. Keep bystanders, children and visitors away while operating
this product. Distractions can cause you to lose control.
5. Stay alert. Watch what you are doing, and use common sense
when operating this tool. Do not use this product while tired or
under the influence of drugs, alcohol, or medication. A moment
of inattention while operating this product may result in serious
personal injury. Keep proper footing and balance at all times. Do
not reach over or across running machines, hoses, cords, etc.
6. Dress properly. Do not wear loose clothing or jewelry. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
7. Work Safe. Operate tool a safe distance from yourself and
others in the work area. Keep proper footing and balance at
all times. Do not overreach, especially on ladders. Be certain
ladders being used are sturdy, stable, on a firm surface and
erected as safe working angles. Do not reach over or across
running machines, hoses, cords, etc.
8. Inspect tool before every use; do not use if parts are loose
or damaged.
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this product. Failure to comply with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information
available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous situation that, if
not avoided, WILL result in death or serious injury.
WARNING Indicates a potentially hazardous situation that, if
not avoided, COULD result in death or serious injury.
CAUTION Indicates a potentially hazardous situation that, if
not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not followed,
MAY cause damage to equipment.
After opening the carton, unpack your new product and related parts & accessories. Please inspect it carefully for
any damage that may have occurred during transit. Please check it against the photograph on carton. If any parts
are missing, please call customer service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacific time.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not operate the product until the parts
have been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage. All damaged parts
must be repaired or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings are secure before
putting this product into service. If you have any questions, or require assistance with damaged or missing parts, please contact our
factory customer service department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for reference when calling.
Specifications are
subject to change
without notice.
Voltage: ............................................................. 120V AC, 60Hz
Rated Power:.................................................. 700W, 5.8 AMPs
RPM: .......................................................................17,000 min.
Air Flow Rate: .............................................................100 CFM
Air Speed: ................................................... 90 MPH (145KPH)
Weight: .............................................................3.3 lbs. (1.5Kg)
Noise Rating: .............................................................98 dB (A)
2
