Date: 30.06.2004
Manual
Revision: 0
DEMON US
Page: 28
Performance Variable e.K. Am Tower 16, D-54634 Bitburg
17)
Now find the D-line group, the group of lines
nearest the tail. (Not the steering lines—they are
attached at the trailing edge.) Pull the left-hand
steering lines off to the left (to get them out of the
way). Follow the stabilizer down to the D lines
and pick up all the D lines on the left side. All lines
in your hand should go through the same grom-
met. If they don't, you've picked up a wrong line.
18)
Now that you are holding only the correct D
lines, you may let go of the steering lines. Take
the whole D-line group on one side and pull it out
gently.
19)
Fold the D-line group in with one motion to put
a real fold in the fabric between the C and D lines.
Do the same thing on the other side.
20)
Now
grasp the steering lines where they at-
tach to the tail, pull the entire tail out and drop it
straight down. “Quarter” the slider and leave it in
its position.
21)
Now
organize the steering lines and tail so the
canopy looks like this. (Even though it might seem
like you've got a disorganized wad of canopy
hanging down in front of you, it should actually be
a neat pack job.)
IMPORTANT
Be sure the stabilizers and their slider stops are
correctly lying outside the suspension lines as
described in Step 14
.
Canopy damage is likely if a
stabilizer (or its slider stop) lies under a line.
