Performax 207-9002, Owner'S Manual

22

FINISH NAIL GUN

SPECIFIC SAFETY RULES

a) If not used correctly and without suitable maintenance, 
the finish nail gun can cause serious injury.

b) Always wear goggles and ear plugs when using the 
finish nail gun.

c) Handle the finish nail gun holding it firmly by the 
grip only.
d) Always disconnect the tool from the air supply 
when unattended, performing any maintenance or 
repair, clearing a jam, or moving the tool to a new 
location. 

Do not load the tool with nails when either the 

trigger is depressed or the Safety device (Fig. 18 - A) is 
engaged. The tool could eject a nail causing death or 
serious personal injury.
e) Always fit tool with a fitting or hose coupling on or near 
the tool in such a manner that all compressed air in the 
tool is discharged at the time the fitting or hose coupling is 
disconnected. Do not use a check valve or any other fitting 
which allows air to remain in the tool. Death or serious 
personal injury could occur.

f) Never place hands or any other body parts in the 
nail discharge area of the tool.

 The tool might eject a 

nail and could result in death or serious personal injury.

g) Do not touch the trigger unless driving nails. 

Never 

attach air line to tool or carry tool while touching the 
trigger. The tool could eject a nail which will result in death 
or serious personal injury.

h) Always assume the tool contains nails.

 Respect 

the tool as a working implement; no horseplay.  Always 
keep others at a safe distance from the work area in case 
of accidental discharge of nails. Do not point the tool 
toward yourself or anyone whether it contains nails or not. 
Accidental triggering of the tool could result in death or 
serious personal injury.

i) Do not nail on top of another nail. 

This is able to 

cause the nail to be deflected and hit someone, or cause 
the tool to react and result in a risk of injury to persons.

j) Do not drop or throw the tool. 

Dropping or throwing 

the tool can result in damage that will make the tool 
unusable or unsafe. If the tool has been dropped or 
thrown, examine the tool closely for bent, cracked or 
broken parts and air leaks. STOP and repair before using 
or serious injury could occur.

k) Always check that the safety device (A) is operating 
properly.

 A nail could accidentally be driven if the safety 

device (A) is not working properly. Personal injury may occur.

l) Disconnect air supply and release tension from the 
trigger before attempting to clear jams because nails 
can be ejected from the front of the tool. 

Personal injury 

may occur.

m) Never use the finish nail gun against metal or 
masonry objects.
n) Never exceed the maximum operating pressure 
indicated for this accessory.

OPERATION

Technical data

Model No.: 9045842

Max. Operating Pressure: ....................................  110 PSI
Recommended Operating Pressure Range:  .... 70-110 PSI
Air inlet: ............................................................... 1/4” NPT
Magazine capacity:  ............................................  100 nails
Firing mode:.... Single actuation / Full sequential actuation
Fastener Gauge: ............................................................16
Fastener Lengths: ................................................ 1” - 2 ½”
Nail size: .............................0.063” x 0.055” - Head: 0.118”

LUBRICATION

Disconnect the finish nail gun from the air supply.
Before using the finish nail gun for the first time and after 
each use, lubricate air inlet (E) of the finish nail gun (Fig. 
10). To lubricate, insert 2-3 drops of lubricant. Using too 
much oil will cause it to collect in the tool and be noticeable 
in the exhaust.
Under low use, lubricate once a day. Under heavy use, 
lubricate twice a day.

TOOL TESTING

Before actually beginning the nailing work, test the tool by 
using the check list below. Conduct the test in the following 
order.
If abnormal operation occurs, stop using the tool and 
performed by qualified repair personnel immediately.

Fig. 10

E

   WARNING:

Remove finger from the trigger when not driving 
fasteners. Never carry the tool with finger on trigger, the 
tool is able to fire a fastener.
Do not attach the hose or tool to your body. Attach 
the hose to the structure to reduce the risk of loss of 
balance if the hose shifts.

   WARNING:

An improperly functioning tool must not be used. 
Do not actuate the tool unless the tool is placed firmly 
against the work piece.