Performax 207-9002, Owner'S Manual

3

   WARNING:

Read and understand all instructions.

 Failure to 

follow all instructions listed below may result in electric 
shock, fire, and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit.

 Cluttered 

benches and dark areas invite accidents. The floor 
must not be slippery from wax or dust.

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable 
liquids, gases, or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while 
operating tools.

 Distractions can cause you to lose 

control.

Operate the air compressor in an open area at 
least 18 in. away from any wall or object that could 
restrict the flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

Avoid body contact with grounded surfaces such as 
pipes, radiators, ranges, and refrigerators.

 There is an 

increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 
electric shock.

Do not abuse the cord. Never use the cord to carry 
the tool or pull the plug from an outlet. Keep the 
cord away from heat, oil, sharp edges, or moving 
parts. Replace damaged cords immediately.

Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an 
outdoor extension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce the 
risk of electric shock.

PERSONAL SAFETY

Eye protection which conforms to ANSI specifica-
tions and provides protection against flying 
particles both from the FRONT and SIDE should 
ALWAYS be worn by the operator and others in the 
work area when loading, operating, or servicing 
this tool.

 Eye protection is required to guard against 

flying fasteners and debris, which could cause severe 
eye injury.

The employer and/or user must ensure that proper 
eye protection is worn.

 We recommend a Wide Vision 

Safety Mask for use over eyeglasses or standard safety 
glasses that provide protection against flying particles 
both from the front and side. Always use eye protection 
which is marked to comply with ANSI Z87.1.

Additional safety protection will be required in 
some environments.

 For example, the working area 

may include exposure to a noise level which can lead to 
hearing damage. The employer and user must ensure 
that any necessary hearing protection is provided 
and used by the operator and others in the work 
area. Some environments will require the use of head 
protection equipment. When required, the employer 
and user must ensure that head protection marked to 
comply with ANSI Z89.1 is used.

Stay alert, watch what you are doing, and use 
common sense when operating a power tool. Do 
not use tools while tired or under the influence 
of drugs, alcohol, or medication.

 A moment of 

inattention while operating power tools may result in 
serious personal injury.

Dress properly. Do not wear loose clothing or 
jewelry. Contain long hair. Keep your hair, clothing, 
and gloves away from moving parts.

 Loose clothes, 

jewelry, or long hair can be caught in moving parts.

Do not overreach. Keep proper footing and balance 
at all times.

 Proper footing and balance enables better 

control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. 

A dust mask, nonskid safety shoes, hard hat, or hearing 
protection must be used for appropriate conditions.

Do not use on a ladder or unstable support.

 Stable 

footing on a solid surface enables better control of the 
tool in unexpected situations.

TOOL USE AND CARE

Do not exceed the pressure rating of any 
component in the system.

Protect material lines and air lines from damage or 
puncture.

 Keep the hose and power cord away from 

sharp objects, chemical spills, oil, solvents, and wet 
floors.

Check hoses for weak or worn condition before 
each use, making certain all connections are 
secure.

 Do not use if a defect is found. Purchase a 

new hose or notify an authorized service center for 
examination or repair.

Release the pressure within the system slowly.

 Dust 

and debris may be harmful.

Store idle tools out of the reach of children and 
other untrained persons.

 Tools are dangerous in the 

hands of untrained users.

Maintain tools with care.

 Follow maintenance 

instructions. Properly maintained tools are easier to 
control.

Check for misalignment or binding of moving parts, 
breakage of parts, and any other condition that 
may affect the tool’s operation. If damaged, have 
the tool serviced before using.

 Many accidents are 

caused by poorly maintained tools.

GENERAL SAFETY RULES