Performax 241-0971, Owner'S Manual

4 

EYE, EAR & LUNG PROTECTION 

– cont’d

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ELECTRICAL SAFETY                  

WARNING: 

To avoid electrical hazards, fire hazards or damage to the 

tool, use proper circuit protection. 
 

This tool is wired at the factory for 120V AC operation. It must be connected 
to a 120V AC, 15 AMP circuit that is protected by a time-delayed fuse or 
circuit breaker. To avoid shock or fire, replace power cord immediately if it 
is worn, cut or damaged in any way.

GENERAL SAFETY WARNINGS 

                 
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN 
OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT

. 

  WARNING:

 Dust that is created by power sanding, sawing, grinding, 

  drilling, and other construction activities may contain chemicals that are 
  known to cause cancer, birth defects, or other genetic abnormalities. These 
  chemicals include: 

  Lead from lead-based paints 
  Crystalline silica from bricks, cement, and other masonry products 
  Arsenic and chromium from chemically treated lumber 

  The level of risk from exposure to these chemicals varies, according to how 
  often this type of work is performed. In order to reduce exposure to these 
  chemicals, work in a well-ventilated area, and use approved safety 
  equipment, such as a dust mask that is specifically designed to filter out 
  microscopic particles. 

! 

SAVE THESE INSTRUCTIONS FOR REFERENCE