7
WARNING:
Know your sander. Do not
plug in the sander until you have read and
understand this Instruction Manual. Learn
the tool’s applications and limitations, as
well as the specific potential hazards related
to this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear eye protection. Any
power tool can throw foreign
objects into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant
lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
WARNING:
Always use a dust mask
when sanding.
WARNING:
Always use hearing
protection when sanding, particularly during
extended periods of operation.
WARNING:
Always unplug the tool from
the power source before changing the
sanding disc or buffing pad and when
cleaning the tool.
Do not wear gloves, neckties or loose clothing.
Secure the workpiece. Use clamps or a vice to
hold the work when practical. It is safer than
using your hand and it frees both hands to
operate the tool.
Do not sand material too small to be securely
held.
Make sure there are no nails or foreign objects
in the part of the workpiece to be sanded.
Always keep hands out of the path of the
sanding pad. Avoid awkward hand positions
where a sudden slip could cause your hand to
move into the path of the sanding pad.
To avoid injury from accidental starting, always
remove the plug from the power source before
installing or removing sandpaper or the dust
box.
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!
!
!
!
Summary of Contents for 241-0971
Page 15: ...15 EXPLODED VIEW...
