background image

14

WARNING! Always wear safety goggles or safety glasses with side 

shields during power tool operations or when blowing dust. If operation is 

dusty, also wear a dust mask.

WARNING! Avoid using solvents when cleaning plastic parts. Most plas-

tics are susceptible to damage from various types of commercial solvents 

and may be damaged by their use. Use clean cloths to remove dirt, dust, 

oil, grease, etc.

ACCESSORIES 

Dust Bag..................................................................................................1pc
80 Grits sandpaper...................................................................................3pcs

WARRANTY

If, during normal use, this PERFORMAX

TM

 power tool breaks or fails due to a defect 

in material  or workmanship within two years from the date of original purchase, 
simply bring this tool and its sales receipt back to your nearest Menards

®

 retail 

store for a free equivalent replacement within those two years. 

The warranty: 
(1)   excludes  expendable  parts  including  but  not  limited  to  blades,  bits,  light 

bulbs, and/or batteries;

(2)   shall be void if this tool is used for commercial or/and rental purposes; and 
(3)   does  not  cover  any  losses,  injuries  to  persons/properties,  or  costs.  This 

warranty does give you specific legal rights and you may have other rights, 
which vary from state to state.

*SAVE YOUR RECEIPTS. Your warranty is void without them. For help, please call 
to our customer center, toll free number: 

1-866-858-2664

.

10-06-17 manual 241-0972 En.indd   14

2010-6-18   12:00:06

Summary of Contents for 241-0972

















Reviews: