Use Cortex
counter-sink bit
Use Cortex
counter-sink bit
Use Cortex
counter-sink bit
Once you have all the braces
installed, put the 2x4 block
back in place, fasten with two
2 1/2” screws at the top and
two 2 1/2“ screws at the
bottom.
Place the outside corner trim
box flush against the header
and the brace, being sure
that the top corner point is
centered on the plate seam.
Fasten with six 2 3/4” Cortex
screws into the pre-drilled
holes on the face of the
corner trim.
Install the inside corner trim.
Fasten with three 2 3/4"
Cortex screws.
Install the bottom brace covers
using three 2 3/4” Cortex
screws. Continue with all 8
braces.
46
45
44
14
47
Summary of Contents for PREMIUM VINYL PAVILION
Page 34: ...You are now ready to return to page 12 step 38 19 34...
Page 35: ...35 Notes...
Page 36: ...36 Notes...