4
Once the template is in posi-
tion, square the template. Do
this by measuring diagonally
from one corner to its oppo-
site corner, then measure
diagonally between the other
two corners. These two
dimensions
MUST
be the
same. Adjust the template
until the diagonal measure-
ments are identical.
Begin by assembling the frame
of the Pavilion structure.
Please note that the Pavilion
kit includes some preassembled
pieces.
NOTE: If you ordered
an electrical package, see
page 23 for installation
instructions before continu-
ing.
5
4
Once the template is “square”,
mark the post locations using
the
INSIDE
corners of the
framed box on the concrete
slab with a pencil. After all
the post locations are marked
on the concrete slab, remove
and set the wooden template
aside.
All of the posts will have two
sides notched. Turn the notches
on the post to the outside to
accept the headers.
4X
7
TO
P
6
