20
Tune Down
Press the “▼ TRACK” button to manually tune down.
Seek Down
Turn the Tune Knob Counter-Clockwise to seek down to next available station.
Changing Bands
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately
turn the rotary knob to scroll through the available sources. Once the band you would
like to select is displayed (“HD-AM” or “HD-FM”), press the “▼ TRACK” button to select
it.
Store Presets
Press the “SCAN” button. Once in the Preset Menu turn the tune knob to select the
preset location (1-18) where you wish to store the preset. When the preset position is
displayed (for example PRE1) press “SEEK/CAT ▲” to store the preset into memory.
The screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button to enter the Preset Menu. Turn the Tune Knob to scroll through
the stored preset stations. When the desired preset is displayed, press the “▼ TRACK”
button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to seek up or “▼” to seek down.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the
screen. Immediately turn the rotary knob to scroll through the available
sources. Once “AUX” is displayed, press the “▼ TRACK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Im-
mediately turn the rotary knob to scroll through the available sources. Once “SAT” is
displayed, press the “▼ TRACK” button to select it.
