background image

7

10.  Troubleshooting

Symptom

Cause

Remedy

Radio shows iPod 

not connected

iPod cable is not 

connected to iPod or 

Gateway. 

Verify the docking cable is connected 

to the Media Gateway, and the iPod

I can not correctly 

control the iPod 

through the radio.

The iPod firmware 

may be out of date. 

Update iPod firmware for free at http://

www.apple.com/ipod/download

I have updated my 

iPod’s firmware 

and still have 

control issues

Sometimes the 

iPods needs to be 

reset

Press and hold the click wheel (center 

button) and the menu button for 10 

seconds. This will reboot the iPod. 

YOU WILL NOT LOSE MUSIC on the 

iPod by doing this reset

I don’t see iPod 

artist or song 

information on the 

screen

The radio is 

displaying a different 

text field

Press the Text / Scan button to see 

text

I can’t use my 

iPod’s click wheel 

to select music

The iPod is in 

external control 

mode. This allows 

text to be displayed 

on the radio screen

Press the Aux / Sat button and select 

AUX 2 source to control the iPod 

manually using the click wheel

The Media 

Gateway does 

not recognize the 

HD Radio tuner 

(HDRT)

The HD tuner 

was not properly 

connected when 

the PXAMG was 

first connected and 

initialized.

HDRT must be connected 

before the 

PXAMG is powered on.

 Disconnect 

the PXAMG from the vehicles harness 

for 5 minutes. Verify the 8 pin DIN 

HDRT cable is securely connected 

at both ends before reconnecting the 

vehicle harness.

Radio shows “DEV 

INIT” 

Gateway device is 

initializing

This only occurs the first time the 

PXAMG is powered on. Wait a few 

minutes, cycle ignition off and on then 

enter SAT Mode.

When I listen to 

the factory AM or 

FM radio there 

is only static, no 

audio.

Factory antenna 

cable is connected 

to the HD Radio 

tuner. 

Use Gateway to access HD Radio 

source. This will provide all AM and 

FM reception for your vehicle.

No AM or FM 

reception using the 

HD Radio source

Factory antenna 

cable is not 

connected to the HD 

Radio tuner (HDRT)

Remove from factory radio, connect 

into HDRT module. Note* some 

vehicles need to use the supplied 

antenna adaptor to make this 

connection.

HD Radio station 

quality fluctuates 

or is lost randomly

The HD Tuner is 

temporarily losing 

reception of the 

Digital HD Radio 

broadcast signal

This is expected performance. The 

Digital HD Radio playback will resume 

in areas of higher broadcast signal 

strength.

Summary of Contents for PGHHY2













Reviews: